English
Español
FLOWORK is committed to manufacturing and developing ball valves with high quality and high user satisfaction in various materials, sizes and pressure ratings. Our valves are in accordance with the strictest international standards involving API 6D, API 607, API-Q1, CE, ISO 9001, ISO 45001, ISO 14001, ISO 15848-1, etc. Apart from above, we can also produce custom-made valves based on customer’s requirements.
Read MoreFLOWORK is accredited by renowned global organizations and certified by strict international standards involving API 600, API 6D, API-Q1, API 607, API 6FA, CE, ISO 9001, ISO 45001, ISO 14001, ISO 15848-1, etc.
FLOWORK ball valves are tested in compliance with the requirements of the strictest test organizations (TUV, SGS, ABS, DNV, etc.).
Some items of FLOWORK ball valves are in stock, so we can deliver prompt and meet customers’ urgent needs. Suitable for corrosive and low temperature medium as well as low boiling point liquid; complete sealing at a relatively high temperature and pressure; lowest flow resistance; competitive prices.
PTFE, RPTFE, PEEK, NYLON, VITON, etc.
It can be NYLON, DEVLON, PEEK, etc.
Yes, forged material is in our production scale, such as A105, LF2, F304, F316, etc.
It can be carbon steel and stainless steel.
Yes, we can offer the duplex stainless steel 4A, and supper duplex stainless steel 5A and 6A are available too.
It depends on many factors, including the valve design, fluid viscosity, allowable pressure drop, etc.
They are O-ring, gasket, and packing.
12 months start from the date leaving factory.
We conduct all valve test before valves leaving our company, so generally there will be no leakage problem. If it happens, we will help customers find the leak place first and then solve it accordingly.
Yes, we can make it according to your request.
No, we can’t, it must be 3-piece type.
Flange end, thread end, welding end, etc.
Yes, V type ball valves are in our supply range.
Yes, they are zero leakage, according to the API598 standard.
Yes, we have, it is also called the Italian type.
Yes, both design are available.
Yes, all our ball valves are anti blow-out stem.
Yes, anti-static is one of our normal designs.
No, casting of ball valve can not bear high pressure 1500lb, it has to be forging.
Yes, we can make plain end for forging ball valves.
API6D, API608, ASME B16.34, ISO 17292, etc.
Yes, we have.
Yes, our ball valves confirm with NACE MR 0175.
Yes, our ball valves are fire safe design and we have fire test certificate API607.
1/2''~40'' 150lb, 1/2''~32'' 300lb, 1/2''~32'' 600lb, 1/2''~24'' 1500lb, 1/2''~12'' 2500lb.
It depends on the quantity and valves specifications.
Ball valves of small sizes and normal materials are in stock.
Yes, we have, like Akzo Nobel non-toxic powder pray paint.
The trunnion ball valve has a fixed shaft on the bottom of the body.
Yes, the price of reduced port ball valve is lower.
DBB ball valves positively isolate both sides of the valve from the bubble-tight seal, and drain any excess medium through the needle valve.
DIB ball valves provides a seal against pressure from a single source, with a means of venting/bleeding the cavity between the sealing surfaces.
No, there is no pressure seal bonnet design for ball valves.
No. The ball valve need to use gear-worm from 6inch.
In general, it is 3.2mm and can be customized.
Part-Turn electric actuator is used for ball valves.
Yes, we have this design and certificate ISO15848-1.
Ordinary ball valves are bidirectional. V-type ball valve is unidirectional.
No, they all are reduced bore.
Yes, we can customize this design.
Tel:+1(281)8275383
E-mail: [email protected]
Whatsapp:+1(281)8275383
Address: 3100 SMITH ST HOUSTON TX, USA 77006
