English
Español
Views:133
Share:
What is the American valve standard？
What is the national standard of American valves？
American valves and related standards are shown in Table 1-1
Table 1-1 US National Standards (ANSI)
| Standard code name | The Standard name |
| ANSIB1.1—1989 | Unified English thread (UN and UNR thread form) |
| ANSIB2.1—1968 | Pipe thread (except for dry seal threads) |
| ANSIB16.14—1991 | Steel pipe plug, bushing and locking nuts (with pipe thread) |
| ANSIZ21.15—2009 | Gas equipment, manual gas valve for equipment connection valve and hose terminal valve |
| ANSIZ21.21—2011 | Automatic valve for gas appliances |
| ANSIZ21.22—2008 | Pressure reducing valve for hot water supply |
| ANSI/ASSE1003—2009 | Energy requirements of the pressure reducing valve |
| ANSI/ASSE1018—2001 | Separator seal start valve light water supply device |
| ANSI/ASSE 1024—2008 | Double check valve type return protection device |
| ANSI/ASSE1044—2001 | Separator seal start valve drain device type and electronic design type |
| ANSI/ASSE1046—1990 | Thermal expansion decompression valve |
| ANSI/ASSE1051—2009 | Gas inlet valve for sewage pipe system |
| ANSI/ASSE1056—2001 | Inverted siphon return vacuum closing valve |
| ANSJ/ASSE1069-2005 | Performance requirements for automatic temperature-controlled hybrid valves |
| ANSIAWWAC111A21.11—2007 | Rubber pad joints for ductile iron pressure pipe and fittings |
| ANSIAWWAC200—2005 | Steel pipes for waterways with 6in (150mm) and more than 6in |
| ANSIAWWAC216—2007 | Polyolefin coating with special parts, connections and fittings for water supply steel pipe |
| ANSI/AWWAC500—2009 | Gate valve is used for the drainage system |
| ANSIAWWAC501—1992 | cast iron gate valve |
| ANSI/AWWAC504—2010 | Rubber pad-sealed butterfly valve |
| ANSI/AWWAC507—2011 | 6~48in (150~1200mm) ball valve |
| ANSI/AWWAC508—2009 | 2~24in (50~600mm) rotary check valve for water supply system |
| ANSI/AWWAC509—2009 | Elastic seat gate valve for feed water |
| ANSI/AWWAC510—2007 | Double check valve return protection assembly |
| ANSI/AWWAC512—2007 | Air valve, air / vacuum and mixed air valves for water supply unit |
| ANSI/AWWAC517—2009 | Soft-sealed cast-iron eccentric stopcock |
| ANSI/AWWAC540—2002 | Power drive device valves and gate valves |
| ANSI/AWWAC550—2005 | Protective internal coating for valves and fire hydrants |
| ANSI/AWWAC800—2005 | Underground pipe valves and fittings |
| ANSI/IASNGV4.6—1999 | Manual control valve for natural gas assembly system |
| ANSI/IASNGV4.7—1999 | Automatic pressure control valve for natural gas sub-assembly system |
| ANSI/ISA75.01.01—2007 | Flow balancing is used for the dimensional control valve |
| ANSI/ISA75.02.01—2008 | The Control Valve Capacity Test Procedure |
| ANSI/ISA75.04—1995 | Structural dimensions of the control valve (150,300 and 600) |
| ANSI/ISA75.05.01—2005 | Control valve terms |
| ANSI/ISA75.08.01—2007 | Structural size of integral flange connection ball control body (125,150,250,300 and 600) |
| ANSI/ISA75.08.02—2009 | Structural dimensions of disconnected control valves (150,300 and 600) |
| ANSI/ISA75.08.03—2007 | Structural dimensions of the spherical control valve for bearing welded ends and spiral ends |
| ANSI/ISA75.08.04—2007 | Structural dimensions of spherical control valve |
| ANSI/ISA75.08.05—2007 | Structural dimensions of the control valve (150,300,600,900,1500 and 2500) |
| ANSI/ISA75.08.06—2007 | Structural dimensions of flange connected ball control valve body (900,1500 and 2500) |
| ANSI/ISA75.08.07—2007 | Structural size of the independent flange ball control valve |
| ANSI/ISA75.08.09—2010 | Structural size of control valve (150,300 and 600) |
| ANSI/ISA75.11.01—1985(R2002) | The inherent flow characteristics and adjustable range of the control valve |
| ANSI/ISA75.14—1993 | Structural size of butt welding connection ball control valve |
| ANSI/ISA75.15—1994 | Face-to-face size of butt-welded spherical control valve (ANSI grade 150,300,600,900,1500,2500) |
| ANSI/ISA75.19.01—2007 | Hydrostatic test of the control valve |
| ANSI/ISA75.22—1999 | Structural dimensions of flange connection spherical angle control valve body |
| ANSI/ISA75.25.01—2010 | Step pper control valve reaction measurement test procedure |
| ANSI/ISA93.00.01—1999 | Standard method for external leakage assessment of manual and automatic opening and closing valves |
| ANSI/FCI69-1—2004 | Standard for the pressure rating of the drain valve |
| ANSI/FCI70-2—2006 | Control the valve seat leakage |
| ANSI/FCI74-1—1991 | Spring-loaded lift diaphragm check valve |
| ANSI/FCI85-1—2003 | Reservoir valve product test |
| ANSI/FCI87-1—2009 | Classification and operation principle of the water trap |
| ANSI/FCI87-2—2008 | Standard of spring formwork drive control valve |
| ANSI/FCI91-1—2010 | Qualification criteria for controlling the sealing of the valve |
| ANSI/UL125—2011 | Safety standards for anhydrous ammonia and liquefied gas valves (except safety valves) |
| ANSI/UL132—2010 | Safety standards for safety valves for anhydrous ammonia and liquefied petroleum gas |
| ANSI/ASSE1044—2001 | Separator seal start valve drain device type and electronic design type |
| ANSI/ASSE1046—1990 | Thermal expansion decompression valve |
| ANSI/ASSE1051—2009 | Gas inlet valve for sewage pipe system |
| ANSI/ASSE1056—2001 | Inverted siphon return vacuum closing valve |
| ANSJ/ASSE1069-2005 | Performance requirements for automatic temperature-controlled hybrid valves |
| ANSIAWWAC111A21.11—2007 | Rubber pad joints for ductile iron pressure pipe and fittings |
| ANSIAWWAC200—2005 | Steel pipes for waterways with 6in (150mm) and more than 6in |
| ANSIAWWAC216—2007 | Polyolefin coating with special parts, connections and fittings for water supply steel pipe |
| ANSI/AWWAC500—2009 | Gate valve is used for the drainage system |
| ANSIAWWAC501—1992 | cast iron gate valve |
| ANSI/AWWAC504—2010 | Rubber pad-sealed butterfly valve |
| ANSI/AWWAC507—2011 | 6~48in (150~1200mm) ball valve |
| ANSI/AWWAC508—2009 | 2~24in (50~600mm) rotary check valve for water supply system |
| ANSI/AWWAC509—2009 | Elastic seat gate valve for feed water |
| ANSI/AWWAC510—2007 | Double check valve return protection assembly |
| ANSI/AWWAC512—2007 | Air valve, air / vacuum and mixed air valves for water supply unit |
| ANSI/AWWAC517—2009 | Soft-sealed cast-iron eccentric stopcock |
| ANSI/AWWAC540—2002 | Power drive device valves and gate valves |
| ANSI/AWWAC550—2005 | Protective internal coating for valves and fire hydrants |
| ANSI/AWWAC800—2005 | Underground pipe valves and fittings |
| ANSI/IASNGV4.6—1999 | Manual control valve for natural gas assembly system |
| ANSI/IASNGV4.7—1999 | Automatic pressure control valve for natural gas sub-assembly system |
| ANSI/ISA75.01.01—2007 | Flow balancing is used for the dimensional control valve |
| ANSI/ISA75.02.01—2008 | The Control Valve Capacity Test Procedure |
| ANSI/ISA75.04—1995 | Structural dimensions of the control valve (150,300 and 600) |
| ANSI/ISA75.05.01—2005 | Control valve terms |
| ANSI/ISA75.08.01—2007 | Structural size of integral flange connection ball control body (125,150,250,300 and 600) |
| ANSI/ISA75.08.02—2009 | Structural dimensions of disconnected control valves (150,300 and 600) |
| ANSI/ISA75.08.03—2007 | Structural dimensions of the spherical control valve for bearing welded ends and spiral ends |
| ANSI/ISA75.08.04—2007 | Structural dimensions of spherical control valve |
| ANSI/ISA75.08.05—2007 | Structural dimensions of the control valve (150,300,600,900,1500 and 2500) |
| ANSI/ISA75.08.06—2007 | Structural dimensions of flange connected ball control valve body (900,1500 and 2500) |
| ANSI/ISA75.08.07—2007 | Structural size of the independent flange ball control valve |
| ANSI/ISA75.08.09—2010 | Structural size of control valve (150,300 and 600) |
| ANSI/ISA75.11.01—1985(R2002) | The inherent flow characteristics and adjustable range of the control valve |
| ANSI/ISA75.14—1993 | Structural size of butt welding connection ball control valve |
| ANSI/ISA75.15—1994 | Face-to-face size of butt-welded spherical control valve (ANSI grade 150,300,600,900,1500,2500) |
| ANSI/ISA75.19.01—2007 | Hydrostatic test of the control valve |
| ANSI/ISA75.22—1999 | Structural dimensions of flange connection spherical angle control valve body |
| ANSI/ISA75.25.01—2010 | Step pper control valve reaction measurement test procedure |
| ANSI/ISA93.00.01—1999 | Standard method for external leakage assessment of manual and automatic opening and closing valves |
| ANSI/FCI69-1—2004 | Standard for the pressure rating of the drain valve |
| ANSI/FCI70-2—2006 | Control the valve seat leakage |
| ANSI/FCI74-1—1991 | Spring-loaded lift diaphragm check valve |
| ANSI/FCI85-1—2003 | Reservoir valve product test |
| ANSI/FCI87-1—2009 | Classification and operation principle of the water trap |
| ANSI/FCI87-2—2008 | Standard of spring formwork drive control valve |
| ANSI/FCI91-1—2010 | Qualification criteria for controlling the sealing of the valve |
| ANSI/UL125—2011 | Safety standards for anhydrous ammonia and liquefied gas valves (except safety valves) |
| ANSI/UL132—2010 | Safety standards for safety valves for anhydrous ammonia and liquefied petroleum gas |
| ANSI/UL144—2010 | Safety standards for LPG pressure regulating valve |
| ANSI/UL193—2008 | Alarm valve is used for fire-fighting facilities |
| ANSI/UL 312—2010 | Check valve is used for fire-fighting facilities |
| ANSI/UL668—2008 | Water belt valve for fire protection facilities |
| ANSI/UL753—2009 | Alarm accessories for automatic water supply control valve for fire fighting |
| ANSI/UL842—2011 | Valve for flammable liquid |
| ANSI/UL1002—2006 | Electric valve for classifying dangerous places |
| ANSI/UL1468-2007 | Direct acting relief and pressure control valves for fire fighting facilities |
| ANSI/UL1478—2008 | Fire-fighting water dish pressure relief valve |
| ANSI/UL1486—2010 | Safety standards for quick start to pipe valve devices for fire fighting facilities |
| ANSI/UL1739—2007 | Pilot-type hydraulic control valve for fire protection |
| ANSI/IEEE382—2006 | Qualification of the actuator of power operating valve components with safety-related functions for nuclear power plants |
| ANSI/IEEE1290—2005 | Guide for motor application, protection, control and test of electric control valves in nuclear power station |
| ANSI/ARI 750—2007 | Refrigerant constant temperature expansion valve |
| ANSI/ARI770—2007 | Refrigoling pressure regulating valve |
| ANSI/ASHRAE17—1998 | Test method for capacity classification of cooling safety valve for temperature regulation |
| ANSI/ASHRAE158.1—2012 | Test method for the capacity of the cooling solenoid valve |
| ANSI/IIAR3—2005 | Ammonia refrigerator valve |
| ANSI(NFPA)T3.21.4R2—200C | Pneumatic valve NFPA / T2.6.1 R2-2000 supplement; pressure rating of hydraulic component to test fatigue and determine the pressure of hydraulic pneumatic valve containing metal housing |
| ANSI/(NFPA)T3.21.8—1990 | Measurement of the pneumatic-hydraulic reaction time directly controls the valve |
