English
Español
Views:4
Share:
What is the American Materials Testing Association standard?
What are the American Materials Testing Association criteria?
The ASMA criteria are presented in Table 1-1
Table 1-1 American Materials Testing Association Standards (ASTM)
| Standard code | Standard name |
| ASTMA6/A6M—2011 | General requirements for rolling steel plate, section steel, sheet pile and bar steel for structure |
| ASTM A20/A20M—2011 | General technical conditions for steel plate for pressure vessels |
| ASTMA27/A27M—2010 | Standard technical conditions for general-purpose carbon steel castings |
| ASTMA29/A29M—2011: | Standard specification for hot forged carbon steel and alloy steel bars |
| ASTMA36/A36M—2008 | Standard specification for carbon structural steel |
| ASTMA48/A48M—2003(R2008) | Standard technical conditions for grey cast iron casting |
| ASTMA53/A53M—2012 | Technical specification for hot-dip, galvanized, welded and seamless steel pipes |
| ASTMA105/A105M—201la | Carbon steel forgings for pipe parts |
| ASTMA106/A106M—2011 | Seamless carbon steel pipe for high temperature |
| ASTMA108—2007 | Standard technical conditions for cold-rolled carbon steel and alloy steel bars |
| ASTMA126—2004(R2009) | Specification for grey cast iron pipe fittings for valves, flanges and pipe fittings |
| ASTMA181/A181M—2006(R2011) | Standard regulations for carbon steel forgings for general pipelines |
| ASTMA182/A182M—201la | Forging or rolled alloy steel flanges, forged and rolled alloy steel flanges, forged pipe fittings, valves and components |
| ASTMA193/A193M—2012 | Alloy steel and stainless steel bolt material for high-temperature use |
| ASTMA194/A194M—2011 | Carbon steel and alloy steel nuts for high pressure or high temperature bolts |
| ASTMA203/A203M—1997(R2007 | Specification for nickel-alloy steel plates for pressure vessels |
| ASTMA213/A213M—201la | Seamless ferrite and austenitic alloy steel boilers, superheaters and heat exchanger tubes |
| ASTMA216/A216M—2008 | High temperature with carbon steel casting gauge suitable for welding |
| ASTMA217/A217M—2011 | Standard specification for martensitic stainless steel and alloy steel castings for high temperature pressure bearings |
| ASTMA230/A230M—2005(R2011) | Oil tempering of the valve spring quality grade |
| ASTMA232/A232M-2005(R201)’ | Road-alum will steel valve spring quality grade of steel wire standard gauge |
| ASTMA240/A240M—2011b | Pressure vessel with heat resistant chromium and chromium nickel stainless steel medium plate, thin plate and belt |
| ASTMA276—2010 | Specification for stainless and heat resistant steel bars and section bars |
| ASTMA278/A278M—2001(R2011) | Grey cast iron gauge for Columbia bearing parts not exceeding 345℃ |
| ASTMA283/A283M—2003(R2007) | Specification of carbon steel plates for low and medium tensile strength |
| ASTM A285/A285M—2003(R2007) | Yuli container with low and medium tensile degree of carbon surface steel standard technical strip P |
| ASTMA307/A307M—2010 | 6000 psi Tensile Strength Carbon Steel Stud and Bolt Standard Specification |
| ASTMA311/A311M—2004(R2010) | Specification for cold-pulled carbon steel bar for stress elimination with mechanical properties requirements |
| ASTMA312/A312M—2011 | Specification for seamless or welded and heavily cold-processed austenitic stainless steel tubes |
| ASTMA320/A320M—2011a | Connect the material with alloy steel at low temperature |
| ASTMA333/A333M—2011 | Standard specification for seamless and welded steel pipes for low-temperature equipment |
| ASTMA334/A334M-2004a(R2010) | Standard Specification for seamless and welded carbon and alloy steel pipes for low-temperature equipment |
| ASTMA335/A335M—2011 | Specification for seamless iron metal alloy steel pipe for high temperature equipment |
| ASTMA336/A336M—2010a | Specification for alloy steel forgings for high temperature pressure parts |
| ASTMA338—84(R2009) | Malleable iron flange fittings and valve parts used by railways, ships and other heavy equipment at temperatures up to 650F (345℃) |
| ASTMA350/A350M—2004a | Standard specification for carbon steel and low-alloy steel forgings for pipe parts requiring cut toughness test |
| ASTMA351/A351M—2012 | Specification for austenitic steel castings for pressure bearings |
| ASTMA352/A352M—2006 | Standard specification for ferrite and martensitic steel ings for low temperature compression |
| ASTMA370—2012 | Standard methods and definitions of mechanical testing of steel products |
| ASTMA387/A387M—2011 | Standard Specification for chromium-molybdenum alloy steel for pressure vessels |
| ASTMA388/A388M—2011 | Operation method of ultrasonic inspection of large steel satin parts |
| ASTMA395/A395M—1999(R2009) | Iron-bearing die casting for high temperature |
| ASTMA403/A403M—2011 | Standard specification for forging austenitic stainless steel pipe fittings |
| ASTMA405—1991 | Specification for seamless ferrite alloy steel pipe used with special heat treatment for high temperature |
| ASTMA421/A421M—2010 | Technical specification for uncoated stress wire for prestressed concrete |
| ASTMA435/A435M—90(R2012) | Standard specification for ultrasonic direct wave inspection of steel plate |
| ASTMA439—1983(R2009) | Austenitic ductile iron cast parts |
| ASTMA479/A479M—2011 | Specification for alloy steel bars and profiles |
| ASTMA480/A480M—2012 | General requirements for flat rolled refractory stainless steel thick sheet, thin sheet and strip |
| ASTMA484/A484M—2011 | Standard requirements for stainless and heat resistant steel bars, billets and forgings |
| ASTMA487/A487M—1993(R2007) | Standard specification for pressed steel castings |
| ASTMA489—2012 | Specification for carbon steel hanging ear |
| ASMEA513—2008a | Resistance welding of carbon steel and alloy steel for mechanical pipe |
| ASTMA516/A516M—2010 | Specification for carbon steel plate for medium and low temperature pressure vessels |
| ASTMA522/A522M—2011 | Standard Specification for 8% and 9% nickel alloy steel flanges, pipe fittings, valves and parts forged or rolled at low temperature |
| ASTMA536—1984(R2009) | Ball ink cast iron parts |
| ASTMA572/572M—2007 | High strength and low alloy cobalt vanadium structural steel |
| ASTMA577/A577M—1990(R2012) | Plate ultrasonic oblique wave test |
| ASTMA582/A582M—2012 | Stainless steel rod |
| ASTMA604/A604M—2007 | Test method for macroscopic corrosion of steel rods and billets |
| ASTMA609/A609M—1991(R2007) | Ultrasonic inspection of carbon steel, low alloy steel and martensitic stainless steel castings |
| ASTMA668/A668M—2004(R2009) | General standard for carbon steel and alloy steel forgings |
| ASTMA672/A672M—2009 | Medium temperature and high pressure electric melt-welded steel pipe |
| ASTMA688/A688M—2012 | Welded austenitic stainless steel feed water heater pipe |
| ASTMA694/A694M—2008 | Standard specification for carbon steel and alloy steel forgings for pipe flanges, fittings, valves and parts for high pressure transmission equipment |
| ASTMA743/743M—2006(R2010) | Rust, corrosion resistant cast steel and casting |
| ASTMA744/A744M—2010e | Specification for corrosion-resistant iron, chromium, nickel, and nickel-based alloy castings used under harsh conditions |
| ASTMA751—2011 | Experimental methods, operations, and terminology for the chemical analysis of steel products |
| ASTMA877/A877M—2010e | Standard specification for chromium-silicon alloy steel wire for valve spring quality grade |
| ASTMA878/A878M—2005(R2011) | Standard specification for improved chrome-silicon alloy steel wire for valve spring quality grade |
| ASTMA961/A961M—2011 | Standard Specification for general requirements for steel flanges, forged pipe fittings, valves and parts for piping |
| ASTMA965/965M—2012 | Austenitic steel forgings for high temperature and high pressure components |
| ASTMA988/A988M—2011 | Standard specification for alloy steel flanges, fittings, valves and components for thermal isostatic stamping for high temperature equipment |
| ASTMA989/A989M—2011 | Standard specification for alloy steel flanges, fittings, valves and components for thermal isostatic stamping for high temperature equipment |
| ASTMA1011/A1011M—2012 | Carbon structural steel, low alloy high strength steel, improved formable high strength low alloy steel and ultra-high strength steel hot rolled thin steel plate and strip steel |
| ASTMA307/A307M—2010 | 6000 psi Tensile Strength Carbon Steel Stud and Bolt Standard Specification |
| ASTMA311/A311M—2004(R2010) | Specification for cold-pulled carbon steel bar for stress elimination with mechanical properties requirements |
| ASTMA312/A312M—2011 | Specification for seamless or welded and heavily cold-processed austenitic stainless steel tubes |
| ASTMA320/A320M—2011a | Connect the material with alloy steel at low temperature |
| ASTMA333/A333M—2011 | Standard specification for seamless and welded steel pipes for low-temperature equipment |
| ASTMA334/A334M-2004a(R2010) | Standard Specification for seamless and welded carbon and alloy steel pipes for low-temperature equipment |
| ASTMA335/A335M—2011 | Specification for seamless iron metal alloy steel pipe for high temperature equipment |
| ASTMA336/A336M—2010a | Specification for alloy steel forgings for high temperature pressure parts |
| ASTMA338—84(R2009) | Malleable iron flange fittings and valve parts used by railways, ships and other heavy equipment at temperatures up to 650F (345℃) |
| ASTMA350/A350M—2004a | Standard specification for carbon steel and low-alloy steel forgings for pipe parts requiring cut toughness test |
| ASTMA351/A351M—2012 | Specification for austenitic steel castings for pressure bearings |
| ASTMA352/A352M—2006 | Standard specification for ferrite and martensitic steel ings for low temperature compression |
| ASTMA370—2012 | Standard methods and definitions of mechanical testing of steel products |
| ASTMA387/A387M—2011 | Standard Specification for chromium-molybdenum alloy steel for pressure vessels |
| ASTMA388/A388M—2011 | Operation method of ultrasonic inspection of large steel satin parts |
| ASTMA395/A395M—1999(R2009) | Iron-bearing die casting for high temperature |
| ASTMA403/A403M—2011 | Standard specification for forging austenitic stainless steel pipe fittings |
| ASTMA405—1991 | Specification for seamless ferrite alloy steel pipe used with special heat treatment for high temperature |
| ASTMA421/A421M—2010 | Technical specification for uncoated stress wire for prestressed concrete |
| ASTMA435/A435M—90(R2012) | Standard specification for ultrasonic direct wave inspection of steel plate |
| ASTMA439—1983(R2009) | Austenitic ductile iron cast parts |
| ASTMA479/A479M—2011 | Specification for alloy steel bars and profiles |
| ASTMA480/A480M—2012 | General requirements for flat rolled refractory stainless steel thick sheet, thin sheet and strip |
| ASTMA484/A484M—2011 | Standard requirements for stainless and heat resistant steel bars, billets and forgings |
| ASTMA487/A487M—1993(R2007) | Standard specification for pressed steel castings |
| ASTMA489—2012 | Specification for carbon steel hanging ear |
| ASMEA513—2008a | Resistance welding of carbon steel and alloy steel for mechanical pipe |
| ASTMA516/A516M—2010 | Specification for carbon steel plate for medium and low temperature pressure vessels |
| ASTMA522/A522M—2011 | Standard Specification for 8% and 9% nickel alloy steel flanges, pipe fittings, valves and parts forged or rolled at low temperature |
| ASTMA536—1984(R2009) | Ball ink cast iron parts |
| ASTMA572/572M—2007 | High strength and low alloy cobalt vanadium structural steel |
| ASTMA577/A577M—1990(R2012) | Plate ultrasonic oblique wave test |
| ASTMA582/A582M—2012 | Stainless steel rod |
| ASTMA604/A604M—2007 | Test method for macroscopic corrosion of steel rods and billets |
| ASTMA609/A609M—1991(R2007) | Ultrasonic inspection of carbon steel, low alloy steel and martensitic stainless steel castings |
| ASTMA668/A668M—2004(R2009) | General standard for carbon steel and alloy steel forgings |
| ASTMA672/A672M—2009 | Medium temperature and high pressure electric melt-welded steel pipe |
| ASTMA688/A688M—2012 | Welded austenitic stainless steel feed water heater pipe |
| ASTMA694/A694M—2008 | Standard specification for carbon steel and alloy steel forgings for pipe flanges, fittings, valves and parts for high pressure transmission equipment |
| ASTMA743/743M—2006(R2010) | Rust, corrosion resistant cast steel and casting |
| ASTMA744/A744M—2010e | Specification for corrosion-resistant iron, chromium, nickel, and nickel-based alloy castings used under harsh conditions |
| ASTMA751—2011 | Experimental methods, operations, and terminology for the chemical analysis of steel products |
| ASTMA877/A877M—2010e | Standard specification for chromium-silicon alloy steel wire for valve spring quality grade |
| ASTMA878/A878M—2005(R2011) | Standard specification for improved chrome-silicon alloy steel wire for valve spring quality grade |
| ASTMA961/A961M—2011 | Standard Specification for general requirements for steel flanges, forged pipe fittings, valves and parts for piping |
| ASTMA965/965M—2012 | Austenitic steel forgings for high temperature and high pressure components |
| ASTMA988/A988M—2011 | Standard specification for alloy steel flanges, fittings, valves and components for thermal isostatic stamping for high temperature equipment |
| ASTMA989/A989M—2011 | Standard specification for alloy steel flanges, fittings, valves and components for thermal isostatic stamping for high temperature equipment |
| ASTMA1011/A1011M—2012 | Carbon structural steel, low alloy high strength steel, improved formable high strength low alloy steel and ultra-high strength steel hot rolled thin steel plate and strip steel |
| ASTMA1008/A1008M—2012 | Specification for high strength low alloy |
| ASTMB16/B16M—2010 | Standard specification for easy cutting brass bar and profile for wire cutting machine |
| ASTMB61—2008 | Standard specification for bronze castings for steam or valves |
| ASTMB62—2009 | Standard Specification for bronze or high copper and brass castings |
| ASTMB462—2010e | Chromium, nickel, molybdenum, copper, niobium stable alloy (UNS N06030, UNSN06022, UNS N06200, UNS N08020, UNS N₀8024, UNS N₀8026,UNS N08367,UNS N010276, UNS N10665, UNS N10675, UNS R20033) alloy pipe flange, forged pipe fittings, forged or rolled for high temperature corrosion resistance Standard Specification for Valves and Parts |
| ASTMB473—2007 | UNS N08020, NO8026 and UNS NO8024 nickel alloy rods and wire |
| ASTMB564—2011 | Standard Specification for nickel-alloy forgings |
| ASTMB584—2011 | Copper-alloy sand castings for general use |
| ASTMB763-2008 | Standard specification for copper alloy sand castings for valves |
| ASTMB834—1995(R2009) | Standard specification for pressure reinforced iron, nickel, chromium-molybdenum and nickel-chromium, molybdenum-mace (Nb) alloy pipe flanges, pipe fittings, valves and parts |
| ASTMC1129—1989(R2008) | Standard procedures for assessing heat storage by adding thermal insulation to convex valves and flanges |
| ASTMD395—2003(R2008) | Standard experimental method for the compression deformation properties of rubber |
| ASTMD1414—1994(R2008) | Standard experimental methods for O-shaped rubber rings |
| ASTMD1418—2010a | Standard specification name for rubber and latex |
| ASTME10—2012 | Standard test method for metal material Brinell (brinell) hardness |
| ASTME18—2011 | Standard test method for ROCKwell (Roche) hardness |
| ASTME94—2004(R2010) | Guide to the standard methods for radiographic testing |
| ASTME140—2007 | Metal hardness conversion table |
| ASTME165—2009 | Standard test method for liquid penetrant test |
| ASTME186—2010 | Reference X-ray photo of a steel casting with a wall thickness (2~4%in) (51~114mm) |
| ASTME428—2008 | Standard practice for manufacturing and control of steel test blocks for ultrasonic testing |
| ASTME446—2010 | Reference ray substrate of steel cast with thickness not greater than lin |
| ASTME675—2002(R2007) | Standard specification for interchangeable conical earth stopcock and embolization |
| ASTME709—2008 | Standard and recommended operation method for magnetic powder testing |
| ASTME911—1998(R2009) | Glass tube plug cock for polytetrafluoroethylene (PTFE) plug |
| ASTME1008—2003(R2009) | Standard implementation specification for the installation, inspection and maintenance of pressure-reducing valve bodies for geothermal and other high-temperature liquid equipment |
| ASTMF37—2006 | Standard test method for the tightness of the gasket material |
| ASTMF704—1981(R2009) | Selection standard for bolt length for flange joints of pipe system |
| ASTMF885—1984(R2011) | Standard specification for external dimensions of bronze globe valves with NPS 1 / 4~2 |
| ASTMF992—1986(R2011) | Standard specification for the valve nameplate |
| ASTMF993—1986(R2011) | Standard specification for the valve locking device |
| ASTMF1020—1986(R2011) | Marine dark line valve |
| ASTMF1030—1986(R2008) | Selection of the valve-operating devices |
| ASTMF1098—1987(R2010) | Standard specification for external dimensions of butterfly valve with nominal pipe diameter of NPS 2 ~ 24 |
| ASTMF1139—1988(R2010) | Steam drain valves and drain |
| ASTM F1155—2010 | Selection and application criteria of piping system materials |
| ASTMF1271—1990(R2006) | Standard Specification for Overflow Valves for liquid overpressure protection devices for onboard storage tanks |
| ASTMF1311—1990(R2006) | Standard specification for large-diameter assembled carbon steel flange |
| ASTMF1370—1992(R2011) | Pressure reducing valve for the ship water supply system |
| ASTMF1373—1993(R2005) | Standard test method for cycle life determination of automatic valves for gas distribution system components |
| ASTMF1394—1992(R2005) | Standard test method for determining the composition of the particles generated from the valves of a gas distribution system |
| ASTMF1508—1996(R2010) | Standard Specification for angle pressure reducing valves for steam, gas, and liquid equipment |
| ASTMF1545—1997(R2009) | Standard for ferroalloy tubes, fittings and flanges |
| ASTMF1565—2000(R2006) | Standard specification for pressure-reducing valves for steam equipment |
| ASTMF1792—1997(R2010) | Standard specification for special demand valves for oxygen |
| ASTMA1008/A1008M—2012 | Specification for high strength low alloy |
| ASTMB16/B16M—2010 | Standard specification for easy cutting brass bar and profile for wire cutting machine |
| ASTMB61—2008 | Standard specification for bronze castings for steam or valves |
| ASTMB62—2009 | Standard Specification for bronze or high copper and brass castings |
| ASTMB462—2010e | Chromium, nickel, molybdenum, copper, niobium stable alloy (UNS N06030, UNSN06022, UNS N06200, UNS N08020, UNS N₀8024, UNS N₀8026,UNS N08367,UNS N010276, UNS N10665, UNS N10675, UNS R20033) alloy pipe flange, forged pipe fittings, forged or rolled for high temperature corrosion resistance Standard Specification for Valves and Parts |
| ASTMB473—2007 | UNS N08020, NO8026 and UNS NO8024 nickel alloy rods and wire |
| ASTMB564—2011 | Standard Specification for nickel-alloy forgings |
| ASTMB584—2011 | Copper-alloy sand castings for general use |
| ASTMB763-2008 | Standard specification for copper alloy sand castings for valves |
| ASTMB834—1995(R2009) | Standard specification for pressure reinforced iron, nickel, chromium-molybdenum and nickel-chromium, molybdenum-mace (Nb) alloy pipe flanges, pipe fittings, valves and parts |
| ASTMC1129—1989(R2008) | Standard procedures for assessing heat storage by adding thermal insulation to convex valves and flanges |
| ASTMD395—2003(R2008) | Standard experimental method for the compression deformation properties of rubber |
| ASTMD1414—1994(R2008) | Standard experimental methods for O-shaped rubber rings |
| ASTMD1418—2010a | Standard specification name for rubber and latex |
| ASTME10—2012 | Standard test method for metal material Brinell (brinell) hardness |
| ASTME18—2011 | Standard test method for ROCKwell (Roche) hardness |
| ASTME94—2004(R2010) | Guide to the standard methods for radiographic testing |
| ASTME140—2007 | Metal hardness conversion table |
| ASTME165—2009 | Standard test method for liquid penetrant test |
| ASTME186—2010 | Reference X-ray photo of a steel casting with a wall thickness (2~4%in) (51~114mm) |
| ASTME428—2008 | Standard practice for manufacturing and control of steel test blocks for ultrasonic testing |
| ASTME446—2010 | Reference ray substrate of steel cast with thickness not greater than lin |
| ASTME675—2002(R2007) | Standard specification for interchangeable conical earth stopcock and embolization |
| ASTME709—2008 | Standard and recommended operation method for magnetic powder testing |
| ASTME911—1998(R2009) | Glass tube plug cock for polytetrafluoroethylene (PTFE) plug |
| ASTME1008—2003(R2009) | Standard implementation specification for the installation, inspection and maintenance of pressure-reducing valve bodies for geothermal and other high-temperature liquid equipment |
| ASTMF37—2006 | Standard test method for the tightness of the gasket material |
| ASTMF704—1981(R2009) | Selection standard for bolt length for flange joints of pipe system |
| ASTMF885—1984(R2011) | Standard specification for external dimensions of bronze globe valves with NPS 1 / 4~2 |
| ASTMF992—1986(R2011) | Standard specification for the valve nameplate |
| ASTMF993—1986(R2011) | Standard specification for the valve locking device |
| ASTMF1020—1986(R2011) | Marine dark line valve |
| ASTMF1030—1986(R2008) | Selection of the valve-operating devices |
| ASTMF1098—1987(R2010) | Standard specification for external dimensions of butterfly valve with nominal pipe diameter of NPS 2 ~ 24 |
| ASTMF1139—1988(R2010) | Steam drain valves and drain |
| ASTMF1155—2010 | Selection and application criteria of piping system materials |
| ASTMF1271—1990(R2006) | Standard Specification for Overflow Valves for liquid overpressure protection devices for onboard storage tanks |
| ASTMF1311—1990(R2006) | Standard specification for large-diameter assembled carbon steel flange |
| ASTMF1370—1992(R2011) | Pressure reducing valve for the ship water supply system |
| ASTMF1373—1993(R2005) | Standard test method for cycle life determination of automatic valves for gas distribution system components |
| ASTMF1394—1992(R2005) | Standard test method for determining the composition of the particles generated from the valves of a gas distribution system |
| ASTMF1508—1996(R2010) | Standard Specification for angle pressure reducing valves for steam, gas, and liquid equipment |
| ASTMF1545—1997(R2009) | Standard for ferroalloy tubes, fittings and flanges |
| ASTMF1565—2000(R2006) | Standard specification for pressure-reducing valves for steam equipment |
| ASTMF1792—1997(R2010) | Standard specification for special demand valves for oxygen |
| ASTM F1794—1997(R2010) | Standard specification for manual, spherical valve gas (excluding oxygen) and hydraulic systems |
| ASTM F1795—2000(R2006) | Standard specification for pressure reducing valves for air or nitrogen systems |
| ASTM F1802-2004(R2010) | Standard test method for the performance test of the overflow valve |
| ASTM F1970—2005 | Standard Specification for special engineering fittings, accessories or valves used in polyvinyl chloride (PVC), chlorinated PVC (CPVE) systems |
| ASTM F1985—1999(R2011) | Standard specification for spherical control valves for pneumatic operation |
| ASTM F2138—2009 | Standard specification for overflow valve for natural gas equipment |
| ASTM F2215—2008 | Standard Specification for black and non-ferrous metal ball bearings for bearings, valves and bearing equipment |
| ASTM F2324—2003(R2009) | Use the standard test method for the pre-cleaned sprayer valve |
